Press and release the close travel limit button to move the chain or belt connector forward to engage the carriage assembly.
How to set the limits on a genie garage door.
If your chain drive has driven limits the limits are individually labelled and adjustable using a screw driver.
Program set program 5 press and release the program set button both leds ﬂash blue and go off.
Travel limits force control programming contact reverse test for models 7055 2055 3055 and 3035 kv.
Press and hold the down button for 2 seconds the long led comes on blue the round led stays off 3.
Bottom of the genie garage door opener.
You can do almost anything all you have to do is try.
Release the down button and the long led will flash blue.
Setting genie chain drive limits.
Press the close travel limit button again and hold it down until the bottom of the door is pressed firmly against the ground.
In this video we show you how to set the travel limits and force control for genie opener models 7055 2055 3055 and 3035 kv.
How to adjust the travel limits of your garage door if it won t close all the way.
Set hold 4 press and hold the down arrow button until garage door is fully closed on ﬂoor then release.
Program set program hold 2 seconds 6 press and hold.
Using the push button or transmitter position the garage door approximately 1 to 2 feet from the closed position.
Follow me and you ll hsve your genie garage door opener adjusted in.
Program your genie garage door opener to recognize when the door is completely closed.
Genie pro max can be tricky gsrsge door opener when adjusting the up down travel limits.
You can find garage door limits on our web site in the genie section or you can go directly to genie limit switch.
Genie garage doors are known for their convenience and easy to use remotes.
Remove any old limit clips which may still be attached to the chain.
If you have a wireless keypad you may also need to recalibrate this device if it doesn t open your garage door properly.
Setting the down limit to purchase these limits click onto genie limits 24701r step 1.
Unfortunately this system becomes less simple when you need to sync or resync your remote.
The down limit is now set.
The driven limits are located on the back or side of the motor head.