The keypad can also be wireless.
How to reset your genie garage door keypad.
Press the default code 3 5 7 or your new code if you have already changed it.
Open your garage door.
The default code for your genie garage door keypad is 3 5 7.
The red light will blink once.
Press the up down button on the keypad slowly until the garage door opener operates.
Open your keypad cover halfway push 8 prog at the same time while lifting the cover the rest of the way.
Resetting your garage door opener keypad.
If you have a wireless keypad you may also need to recalibrate this device if it doesn t open your garage door properly.
Lost your garage door manual.
Never knew the pin in the first place.
After pressing the learn button you will see an led light steadily glowing for about 30 seconds.
Reset and reprogram your intellicode 3 keypad to reset the intellicode 3 keypad enter the current pin then press the program key.
It is not compatible with genie intellicode transmitters if your keypad has intellicode printed on the cover go to the next set of programming instructions below.
Unfortunately this system becomes less simple when you need to sync or resync your remote.
Keypad is black with a slide up cover showing the genie logo only this keyless garage door opener entry pad works with genie transmitters using 390 mhz frequency.
During this time enter your new code on your keypad and slowly press and release the up down arrow key several times until the door begins to move.
This procedure is for the keypads with the flip up covers although it may work for others.
To reset your garage door opener keypad all you have to do is press the learn button located at the back or sides of the motor unit of your electronic garage door opener.
Genie garage door openers can be controlled by radio controlled transmitters and also by a wall mounted keypad.
With the push of a few buttons you can reset either your genie opener or wireless keypad in a matter of minutes.
If so then this may help you reset the keypad to a pin you can use.